Tekno Point FLAT SCREEN SFS-09HM - AUTO, HEAT, Cool,Sweep and DRY Operation; Operating Method

USER’S MANUAL
-13-
O
n /
O
f
f
T
e
m
p
AUH
Sweep Speed
Sl e e p
M
ode
Re s e t
Mi n u t e
Ho u r
Se t Ti me
Qui et
OPERATING METHOD
AUTO, HEAT, COOL,SWEEP and DRY operation
Remarks:
1.When “AUTO” mode is set, air conditioner will adapt to HEAT, COOL mode according to the D-value
between indoor temperature and set temperature.
2.When “AUTO” mode is set, Sleep function is not available.
3.When “DRY” mode is set, in accordance with the D-value between indoor temperature and set
temperature. Air conditioner will start or stop the cooling operation and fan speed automatically to
decrease room humidity. Fan speed can’ t be controlled sometimes.
4.When SLEEP mode is set, temperature can’ t be adjusted. Step 2 of Operating procedures is not
effective. Only high, medium and low fan speed can be set; no Auto fan speed.
Switch On
Press On/Off button
to start air
conditioner.
3
Switch Off
Press On/Off button to stop air
conditioner.
6
Temp Adjustment Buttons
Press “ ” “ ”
buttons to set temp
as needed
2
Setting Operation Mode
AUTO HEAT SWEEP
COOL DRY
1
Airflow selection
Press “Sweep”
button to select
airflow direction.
4
5
Setting Fan Speed
Four speeds can be selected
Auto High
Medium Low
AUT