TEKTELIC Communications Kona Macro Gateway Quick Start Guide

Kona Macro Quick Start Guide T0005158_QS Version 0.3
TEKTELIC Communications Inc. Confidential Page 9 of 14
10. Verify 3G/4G Connectivity (on applicable modules only):
The Wireless Modem tab in KonaFT is only displayed on modules with a modem and
provides LTE modem information, Network provider information, APN information,
RF information, call statistics and IP address.
▪ Select the “Wireless Modem” tab and click “Poll Now” button in each section
▪ Verify a public IP is assigned in the top window
▪ Verify Session State is CONNECTED in the Home Network window
▪ Verify Call Status is CONNECTED in the Call Statistics window
▪ The APN setting of the modem can be viewed in the Active Profile Parameters
window
▪ Signal Strength (RSSI) of the cellular connection is displayed in the RF Information
window
Figure 5: Wireless Modem Information
11. Verify Firewall configuration:
▪ Select Firewall tab on KonaFT, then select “Read Firewall Configuration”. The
existing firewall rules will be displayed.
▪ Default Firewall rules will allow SSH connectivity from any address.
▪ Please contact Tektelic if pre-loaded Firewall rules are required from the Factory.
▪ The Firewall tab allows users to edit, create or delete Firewall rules for the
Gateway.

TEKTELIC Communications Kona Macro Gateway Specifications

General

Brand	TEKTELIC Communications
Model	Kona Macro Gateway
Category	Gateway
Language	English