Tektronix AWG5200 Series - Recommended Accessories; Product Options

Recommended accessories
Accessory Part number
GPIB to USB Adapter Enables GPIB control through USB B port TEK-USB-488
Power Splitters 1.5 kHz - 18 GHz Mini-Circuits ZX10-2-183-S
+
DC-18 GHz Picosecond Pulse Labs
5331
Amplifiers 2.5 kHz - 10 GHz, 26 dB gain RF-Lambda
RAMP00G20GA
0.01 - 20 GHz, 30 dB gain Mouser 565-72979
Rack mount kit Enables installation into an equipment rack GF-RACK3U
Product options
Instrument Option Description
AWG5202 16 bit, 2 GSamples/channel record length, 2-channel arbitrary waveform
generator
AWG5200-225 2.5 GS/s
AWG5200-250 5 GS/s (10 GS/s interpolated)
AWG5200-2DC High Bandwidth Amplified outputs
AWG5200-2DIGUP Digital up conversion (requires AWG5200-250)
AWG5200-2AC AC Amplified outputs
AWG5200-SEQ Sequencing
AWG5202-ACCY01 USB mouse, compact USB keyboard, touch screen stylus
AWG5200-SSD Additional (or replacement) preprogrammed solid state drive
AWG5204 16 bit, 2 GSamples/channel record length, 4-channel arbitrary waveform
generator
AWG5200-425 2.5 GS/s
AWG5200-450 5 GS/s (10 GS/s interpolated)
AWG5200-4DC High Bandwidth Amplified outputs
AWG5200-4DIGUP Digital up conversion (requires AWG5200-450)
AWG5200-4AC AC Amplified outputs
AWG5200-SEQ Sequencing
AWG5204-ACCY01 USB mouse, compact USB keyboard, touch screen stylus
AWG5200-SSD Additional (or replacement) preprogrammed solid state drive
Install the instrument
4 AWG5200 Series Installation and Safety Instructions