To Next Page

To Previous Page

Performance tests

– Marker low level accuracy

The marker low l

evel accuracy is tested using the PV_DC_P lus.wfmx ﬁle.

25. In the Waveform List window, select (drag and drop) the PV_DC_Plus.wfmx

waveform to th

eworkspace.

26. Repeat steps 15 through 20 to complete the low leve l accuracy test for the

M1 – Marker output.

CH 1 Markers

M2 + and

M2 – accuracy

27. Repeat steps 7 through 26 for CH 1 Markers M2 + and M2 – outputs.

AWG70002A marke r

accuracy

28. If you are testing an AWG70002A, repeat the marker test (steps 7 through 27)

for the Channel 2 marker outputs.

29. Press the All Outputs On/Off button on the instrument to turn off all the

outputs.

30. Disconnect the test se tup.

2–34 AWG70000A Series and AWGSYNC01 Technical Reference

Tektronix AWG70002A User Manual

Other manuals for Tektronix AWG70002A