Trigger Setup
Trigger Type Trigger Conditions
Sequence
(B Trigger)
Combine an edge A Event (Main) trigger with the B Event
(Delayed) trigger to capture more complex signals. (See
page 157, Using Sequence Trigger (A (Main) and B
(Delayed)).)
Time. After the A Event occurs, the trigger system waits
the specified amoun t of time, and then looks for th e B Event
before triggering and displaying the w aveform.
Events. After the A Event occurs, the trigger system looks
for a specified number of B Events before triggering and
displaying the waveform.
Pulse Width Trigger on pulses that are less than, greater than, equal to,
or not equal to a specified tim e. You can trigger on positive
or neg ative pulses. Pulse width triggers are primarily used
on digital signals.
140 MSO4000 and DPO4000 Series Oscilloscopes User Manual
To Next Page
Loading...
