To power on the 4200A-SCS:
1. Make sure the power is o. The power switch, on the
front panel in the lower right corner, is not lit when power
is o.
2. Plug the male end of the line cord into a properly
grounded ac line power receptacle.
3. Turn on the 4200A-SCS by pushing the power switch.
The switch is lit when power is on.
The instrument starts up.
When rst starting a Clarius+ application, you must answer
“Yes” to an on-screen license agreement. Answering “No”
makes your system nonfunctional until you reinstall the
software.
To Next Page
Loading...
