19. Turn Multipurpose a to select Address.
20. Press the lower-bezel Address button.
21. The side-bezel Address button should
already be selected.
22. Turn Multipurpose a and b to enter a
hex address of 50.
- Turn Multipurpose a clockwise to the
first ‘X’
under Hex
- Turn Multipurpose b clockwise to
show the digit ‘5’.
- Turn Multipurpose a clockwise to
move the cursor to the next ‘X’
- Turn Multipurpose b clockwise to
show the ‘0’ digit
Figure 17.
www.tektronix.com/mdo300026
MDO3000 Series Oscilloscope
Demonstration Guide
To Next Page
Loading...
