10. Press the blue D15-D0 front-panel
button.
11. Press the lower-bezel D15-D0 On/Off
button, not the blue D15-D0 front-panel
button.
12. Press the side-bezel Turn On D7-D0
button to display channels D0 through
D7.
13. Position Ch1 above the digital channels in
the upper portion of the display. Press the
Monitor lower-bezel button to turn on the
digital channel Monitor.
14. Press Single to make an acquisition.
15. Press Menu Off.
Figure 24.
www.tektronix.com/mdo3000 33
MDO3000 Series Oscilloscope
Demonstration Guide
To Next Page
Loading...
