4. Obtain or enter the network address information:
■
If your network is DHCP-enabled and the IP address field does not already show an address, tap Auto to obtain the IP
address information from the network. DHCP mode is the default mode.
■
If your network is not DHCP-enabled or you need a static (non-changing) IP address for this instrument, tap Manual
and enter the IP address and other values provided by your IT or system administrator resource.
5. Tap Test Connection to verify that the network connection is working. The LAN Status icon turns green when the
instrument successfully connects to your network. If you have problems connecting to your network, contact your system
administration resource for help.
Configure the instrument
MDO32, MDO34 Installation and Safety Manual 35
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
