EasyManuals Logo

Tektronix MDO34 Installation And Safety Manual

Tektronix MDO34
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Preface
This manual provides product safety and compliance information, describes how to connect and power on the oscilloscope, and
introduces the basic instrument features, controls, and operations. See the product Help file for more detailed information.
Key features
Welcome to the 3 Series MDO. The 3 Series MDO Oscilloscopes (MDO32 and MDO34) are 2- and 4-channel oscilloscopes,
enabling you to efficiently and cost-effectively perform mixed domain debugging.
A dedicated RF input channel for frequency domain measurements
Bandwidths from 100 MHz to 1 GHz
2- and 4-channels for time domain measurements
Sixteen-channel digital input option
Large 11.6” HD (1920 x 1080 pixel) capacitive touchscreen display
User interface optimized for touchscreen use
Sample rates of 2.5 GS/s on all analog channels (5 GS/s on 1 or 2 channels for the MDO34 or MDO32 with the 1 GHz
option)
10 M points record length on all channels
Maximum waveform capture rate: 280,000 waveforms/second, with FastAcq: >50,000 waveforms/second with normal
operation
Advanced triggering and analysis: I2C, SPI, USB 2.0, CAN, CAN FD, LIN, FlexRay, RS-232, RS-422, RS-485, UART, I2S,
Left Justified (LJ), Right Justified (RJ), TDM, MIL-STD-1553, ARINC429 (with the appropriate option), and Parallel
Power analysis (optional)
Arbitrary function generator and 16 digital channels (optional)
Digital voltmeter and trigger frequency counter free with product registration
MDO32, MDO34 Installation and Safety Manual vii
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Other manuals for Tektronix MDO34

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix MDO34 and is the answer not in the manual?

Tektronix MDO34 Specifications

General IconGeneral
Analog Channels4
Sample Rate2.5 GS/s
Record Length10 Mpoints
Mixed Domain AnalysisYes
Waveform Capture Rate>280, 000 wfms/s
Spectrum Analyzer Frequency Range9 kHz to 3 GHz
Vertical Resolution8 bits
Input CouplingAC, DC, GND
Operating Temperature0°C to +50°C
Digital Channels16
ConnectivityUSB, LAN, HDMI
Arbitrary Function Generator50 MHz
Trigger TypesEdge, Pulse Width, Runt, Logic, Setup/Hold, Rise/Fall Time, Video
Input Impedance1 MΩ
Maximum Input Voltage300 Vrms
Dimensions140 mm
Weight4.5 kg
Bandwidth100 MHz, 200 MHz, 350 MHz, 500 MHz
Display10.1-inch capacitive touch HD display
Voltmeter4-digit

Related product manuals