Tektronix MSO2012 User Manual

Acquire the Signal
To acquire da ta from an SPI bus, you need to also set up these items:
1. If you selected SPI, push Define Inputs and
the desired side-bezel menu choices.
Bus
SPI
Define
Inputs
Thresholds
Configure
B1 Label
SPI
Bus Display Event Table
You can set the Framing to SS (Slave Select)
or to Idle Time.
You can assign the predefined SCLK, SS,
MOSI,orMISO signals to any channel.
2. Push Configu re and the desired side-bezel
menu choices.
102 DPO2000 and MSO2000 S eries Oscilloscopes User Manual

Tektronix MSO2012 Specifications

General

Brand	Tektronix
Model	MSO2012
Category	Test Equipment
Language	English