Acquire the Signal
When the signal is not filtered, most measurements are taken on the foreground waveform. The min, max, a nd peak-to-peak
measurements are taken on the glitch capt ure background, because they measure the smallest an d largest amplitudes in
the waveform.
When the signal is filtered, all measurements are taken from the filtered waveform.
Dual-waveform math can be filtered; the chosen noise filter frequency also applies to math . Dual-waveform math does not
have a glitch capture background .
Search uses the glitch capture background, when available. This lets you better se arch for spikes and other ano malies.
Serial bus decode uses a full-re solution sample (foreground) waveform. When filtering is active, that waveform might not
be filtered to the chosen frequency.
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 119
To Next Page
Loading...
