Tektronix MSO5034B User Manual

x
MSO70000C/DX Series Mixed Signal Oscilloscopes
DPO70000C/DX Series Digital Phosphor Oscilloscopes
DPO7000C Series Digital Phosphor Oscilloscopes
MSO5000B and DPO5000B Series Oscilloscopes
ZZZ
User Manual
*P071298004*
071-2980-04

Tektronix MSO5034B Specifications

General

Bandwidth	350 MHz
Channels	4
Analog Channels	4
Digital Channels	16
Sample Rate (Analog)	2.5 GS/s
Sample Rate	2.5 GS/s
Vertical Resolution	8 bits
Display	Touchscreen
Form Factor	Benchtop
Operating System	Windows
Interface	USB, LAN

Summary

Important safety information

General safety summary

Follow safety precautions to avoid injury and prevent damage to the product or connected products.

To avoid fire or personal injury

Guidelines for preventing fire and personal injury, including proper power cord usage and grounding.

Service safety summary

Additional information for safely performing service procedures on the product.

Compliance information

EMC compliance

Safety compliance

Install your instrument

Operating requirements

Specifications for temperature, humidity, altitude, and input voltage.

Preventing ESD

Powering on the instrument

Getting acquainted with your instrument

Interface and display

Control panel

Inspect your instrument

Verify internal diagnostics pass

Acquisition

Signal path compensation

Procedure to perform signal path compensation for accurate measurements.

Setting up analog signal input

Steps to connect and set up analog signal input for acquiring signals.

Changing the acquisition mode

Using FastAcq

Setting up digital signal input

Procedure to set up digital channels and buses for signal acquisition.

Setting up a bus

Pinpoint triggers

Choosing a trigger type

Guide to selecting basic and advanced trigger types available on the instrument.

Trigger selections

Using a (Main) and b (Delayed) triggers

Procedure for using A and B triggers to capture complex signals sequentially.

Triggering using Visual Triggers (Visual Triggering)

Method for creating trigger conditions directly on the display screen.

Setting up Action on Event

Configuring the instrument to save files when a defined event occurs.

Display a waveform

Using MultiView Zoom

Searching and marking waveforms

Analyzing waveforms

Taking automatic measurements

Procedure for selecting and performing automatic measurements on waveforms.

Taking cursor measurements

Using math waveforms

Using Spectral Analysis

Using the Serial Error Detector

Utilizing the Serial Error Detector for debugging serial data and detecting errors.

Using mask testing

Comparing signals to predefined masks for compliance testing.

MyScope

Creating a new MyScope control window

Using MyScope control windows

Application examples

Capturing intermittent anomalies

Using FastAcq and advanced triggering to find and capture intermittent anomalies.

Correlating data between a Tektronix oscilloscope and logic analyzer

Using iView to time-correlate data between oscilloscope and logic analyzer.

Appendix C

TPP0500 and TPP1000 500 MHz and 1 GHz 10X passive probes instructions

Safety summary

Safety precautions for using probes and accessories correctly.

Appendix D

P6616 General-Purpose Logic Probe instructions