Need help?Do you have a question about the Tektronix MSO5204 and is the answer not in the manual?
General| Bandwidth | 2 GHz |
|---|---|
| Input Voltage Range | ±5 V |
| Form Factor | Benchtop |
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Operating Temperature | 0 °C to +50 °C |
| Channels | 4 analog, 16 digital |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage | 300 VRMS CAT II |
| Input Impedance | 1 MΩ |
| Trigger Types | Edge, Pulse Width, Runt, Timeout, Logic |
| Interface | USB, LAN |
| Weight | 10.9 kg |
Lists EMC standards the instrument complies with, including EC Declaration.
Details safety compliance standards and classifications like Pollution Degree.
Provides techniques to prevent electrostatic discharge damage to the instrument.
Describes the function of each control on the instrument's front panel.
Procedure to run internal diagnostics and verify instrument functionality.
Procedure to ensure accurate measurements by calibrating the signal path.
Steps to connect probes and select input channels for signal acquisition.
Automatically sets acquisition parameters for optimal waveform display.
Enhances waveform capture speed to find anomalies like glitches.
Utilizes DSP for more accurate measurements and extended bandwidth.
Explains fundamental trigger events, modes, and holdoff principles.
Guides on selecting various trigger types available on the instrument.
Details trigger conditions for different trigger types like Edge, Glitch, and Serial.
Combines main and delayed triggers for capturing complex signals.
Guides on using the instrument's automated measurement features.
Critical safety warnings related to electrical hazards and proper usage.
To Next Page