EasyManuals Logo
Home>Tektronix>Test Equipment>TAS 200 Series

Tektronix TAS 200 Series Technical Reference

Tektronix TAS 200 Series
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
DMM800 Series Specifications
6
Handheld and Benchtop Instruments Basic Service
Table 4: Physical Characteristics
Characteristic Description
Dimensions
Without holster 32 mm × 86 mm × 185 mm (H × W × D)
Weight
With battery 370 g (13 oz.)
With battery and holster 600 g (21.2 oz.)
Table 5: Environmental Characteristic
Characteristic Description
Temperature
Operating 0_ to +50_ C
Nonoperating (storage) –20_ to +60_ C
Humidity
Operating <80%
Altitude
Operating 2,222 m (7290 ft.)
Nonoperating 12,300 m (40354 ft.)
Vibration
Operating 2.66 g
RMS
, 5 to 500 Hz, 3 axes (10 minutes each)
Nonoperating 3.48 g
RMS
, 5 to 500 Hz, 3 axes (10 minutes each)
Table 6: Certifications and Compliance
Characteristic Description
E
C
Declaration of
C
onfor
m
it
y
Meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low
Voltage Directive 73/23/ECC for Product Safety. Compliance was demonstrated to the
following specifications as listed in the official Journal of the European Communities:
EN 55011 Class A: Radiated and Conducted Emissions
EN 50082–1 Immunity: IEC 801–2 Electrostatic Discharge
IEC 801–3 RF Radiated
EN 61010-1: Electrical equipment safety requirements for
measurement,control, and laboratory use
Certifications Certified UL3111-1 and CAN/CSA C22.2 No. 1010.1-92

Table of Contents

Other manuals for Tektronix TAS 200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix TAS 200 Series and is the answer not in the manual?

Tektronix TAS 200 Series Specifications

General IconGeneral
BrandTektronix
ModelTAS 200 Series
CategoryTest Equipment
LanguageEnglish

Related product manuals