Compliance information
Measurement and
overvoltage category
descriptions
Measurement te
rminals on this product may be rated for measuring mains voltages
from one or more of the following categories (see specific ratings marked on
the product and in the manual).
Category II. Circuits directly connected to the building wiring at utilization
points (socket outlets and similar points).
Category III. In the building wiring and distribution system.
Category IV
. At the source of the electrical supply to the building.
NOTE. Only mains power supply circuits have an overvoltage category rating.
Only measurement circuits have a measurement category rating. Other circuits
within the product do not have either rating.
Mains overvoltage
category rating
TCPA300/400 only: Overvoltage category II (as defined in IEC 61010-1).
Environmental considerations
This section provides information about the environmental impact of the product.
Restriction of hazardous
substances
Complies with RoHS2 Directive 2011/65/EU.
Product end-of-life
handling
Obse
rve the following guidelines when recycling an instrument or component:
Equipment recycling. Production o f this equipment required the extraction and
use of natural resources. The equipment may contain substances that could be
harmful to the environment or human health if improperly handled at the product’s
end of life. To avoid relea se of such substances into the environment and to
re
duce the use of natural resources, we encourage you to recycle this product in
an appropriate system that will ensure that most of the materials are reused or
recycled appropriately.
This symbol indicates that this product complies with the applicable European
U
nion requirements according to Directives 2012/19/EU and 2006/66/EC
on waste electrical and electronic equipment (WEEE) and batteries.
For information about recycling options, c heck the Tektronix Web site
(
www.tek.com/productrecycling).
Amplifiers a nd Current Probes Compliance and Safety Instructions 9
To Next Page
Loading...
Need help?
General
