Tektronix TDS 340 Technical Reference

Technical Reference
TDS 340A, TDS 360 & TDS 380
Digital Real-Time Oscilloscopes
070-9436-04
This document applies to firmware version 1.05
and above.
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.

Tektronix TDS 340 Specifications

General

Bandwidth	100 MHz
Sample Rate	500 MS/s
Channels	2
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Input Coupling	AC, DC, GND
Timebase Accuracy	50 ppm
Memory Depth/Record Length	2500 points
Connectivity	RS-232, Centronics
Timebase Range	5 ns to 5 s/div
Input Impedance	1 MΩ
Trigger Modes	Edge, Video
Power Requirements	100-240 VAC, 50/60 Hz
Dimensions	12.5 in x 5.3 in
Maximum Input Voltage	400 V (DC + peak AC)