Tektronix TDS 360 Technical Reference

TDS 340A, TDS 360 & TDS 380 Technical Reference
6–49
Repackaging Instructions
If you ship the oscilloscope, pack it in the original shipping carton and packing
material. If the original packing material is not available, package the instrument
as follows:
1. Use a corrugated cardboard shipping carton with inside dimensions at least
15 cm (6 in) taller, wider, and deeper than the oscilloscope. The shipping
carton must be constructed of cardboard with 170 kg (375 pound) test
strength.
2. If you are shipping the oscilloscope to a Tektronix field office for repair,
attach a tag to the oscilloscope showing the instrument owner and address,
the name of the person to contact about the instrument, the instrument type,
and the serial number.
3. Wrap the oscilloscope with polyethylene sheeting or equivalent material to
protect the finish.
4. Cushion the oscilloscope in the shipping carton by tightly packing dunnage
or urethane foam on all sides between the carton and the oscilloscope. Allow
7.5 cm (3 in) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial stapler.

Tektronix TDS 360 Specifications

General

Brand	Tektronix
Model	TDS 360
Category	Test Equipment
Language	English