Tektronix TDS 500C Programmer's Manual

Command Descriptions
2–88
TDS Family Oscilloscope Programmer Manual
Cursor
CURSor:PAIred:POSITION<x>Pcnt <NR3>
CURSor:PAIred:POSITION<x>Pcnt?
CURSor
:
PAIred :
POSITION
<x>
?
<Space> <NR3>
Pcnt
<NR3> has a range of 0 to 100 (%). It specifies the cursor position relative to the
record length of the selected waveform.
CURSOR:PAIRED:POSITION1PCNT?
might return 4.50 E+1, indicating cursor 1 is positioned at 45% of the record
length of the selected waveform.
CURSor:PAIred:SELect
Selects the active paired cursor. The active cursor appears as a solid vertical line.
The unselected cursor appears as a dashed vertical line. This command is
equivalent to pressing the SELECT button on the front panel when the Cursor
menu is displayed.
Cursor
CURSor:PAIred:SELect { CURSOR1 | CURSOR2 }
CURSor:PAIred:SELect?
CURSor
:
PAIred
:
SELect
?
<Space>
CURSOR2
CURSOR1
CURSOR1 specifies the first paired cursor.
CURSOR2 specifies the second paired cursor.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments

Tektronix TDS 500C Specifications

General

Brand	Tektronix
Model	TDS 500C
Category	Test Equipment
Language	English