Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–67
Application Menu
APPMenu, APPMenu:LABel
APPMenu:TITLe <QString>
APPMenu:TITLe?
TITLe
<Space>
<QString>
?
APPMenu :
<QString> is the side menu title and can include any of the characters shown in
the TDS Character Chart in Appendix A. The maximum length of the title is
1000 characters. The APPMenu:LABel:BOTTOM<x> command on page 2–65
provides information on defining menu labels.
The label area is 40 pixels high and 112 pixels wide. The length of the label that
fits in the label area depends on the contents of the label, because the width of
characters varies. The label area is about 12 characters wide and 4 lines high. For
a complete list of character widths in pixels, see Table A–1 on page A–1.
APPMENU:TITLE "Custom Menu"
displays the title “Custom Menu” on the screen.
APPMENU:TITLE?
might return "Test Setup" for the current application menu title.
AUTOSet (No Query Form)
Causes the digitizing oscilloscope to adjust its vertical, horizontal, and trigger
controls to provide a stable display of the selected waveform. This is equivalent
to pressing the front-panel AUTOSET button. For a detailed description of the
autoset function, see Autoset in the Reference section of the User Manual for
your instrument.
This command will turn the extended-acquisition-length mode to off.
Miscellaneous
AUTOSet EXECute
Group
Related Commands
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
Need help?
General
