Saving and Recalling Waveforms
TDS 620A, 640A, & 644A User Manual
3Ć135
resulting scrollbar list. Only files with .WFM extensions are displayed. Finally,
press from the side-menu To Ref1, To Ref2, To Ref3, or To Ref4 choices to
complete the operation.
Figure 3-70: More Menu
Autosave (TDS 640A and 644A only)
To use autosave, press
Autosave (main) ➞ Autosave Single Seq ON (side).
Also turn on Single Acquisition Sequence in the Acquire menu
(see page 3-7).
To disable this feature, simply press
Autosave (main) ➞ Autosave Single Seq OFF (side).
If you enable both autosave and single sequence, the TDS will save all live
channels to reference waveforms at the completion of each single sequence
event. All previous reference waveform data will be erased.
Running File Utilities
To run file utilities (optional on the TDS 620A & TDS 640A), see the
File
System
article on page 3-55.
See
Selecting Channels
, on page 3-136.
For More
Information
To Next Page
Loading...
Need help?
General
