Command Descriptions
2–94
TDS Family Oscilloscope Programmer Manual
DATA:WIDth 1
sets the data width to 1 byte per data point for CURVe data.
DATE
Sets or queries the date that the digitizing oscilloscope can display.
Miscellaneous
DISplay: CLOCk, TIMe
DATE <QString>
DATE?
<QString>
DATE
<Space>
?
<QString> is a date in the form yyyy-mm-dd".
mm refers to a two-digit month number from 01 to 12.
dd refers to a two-digit day number in the month.
yyyy refers to a four-digit year number.
There must a dash (–) after the yyyy and after the mm.
DATE "1993-01-24"
specifies that the date is set to January 24
th
, 1993.
*DDT
Allows the user to specify a command or a list of commands that are executed
when the instrument receives a *TRG command or the GET GPIB interface
message. This is just a special alias that *TRG uses.
Miscellaneous
ALIAS:DEFINE, *TRG, Get GPIB interface message
*DDT { <Block> | <QString> }
Examples
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax
To Next Page
Loading...
Need help?
General
