TDS 500B, TDS 600B, & TDS 700A User Manual
xi
Preface
This is the User Manual for the TDS 500B, TDS 600B, & TDS 700A Digitizing
Oscilloscopes.
The chapter Getting Started briefly describes the TDS Oscilloscope, prepares
you to install it, and tells you how to put it into service.
The chapter Operating Basics covers basic principles of the operation of the
oscilloscope. The operating interface illustrations and the tutorial examples
rapidly help you understand how your oscilloscope operates.
The chapter Reference teaches you how to perform specific tasks. See page 3–1
for a complete list of operating tasks covered in that chapter.
The Appendices provide an options listing, an accessories listing, and other
useful information.
Related Manuals
The following documents are related to the use or service of the oscilloscope.
The TDS Family Digitizing Oscilloscopes Programmer Manual (Tektronix
part number 070-
9556-XX) describes using a computer to control the
oscilloscope through the GPIB interface.
The TDS 500B, TDS 600B, & TDS 700A Reference (Tektronix part number
070-9382-XX) gives you a quick overview of how to operate the oscillo-
scope.
The TDS 500B, TDS 600B, & TDS 700A Technical Reference (Performance
Verification and Specifications) (Tektronix part number 070-9384-XX) tells
how to verify the performance of the oscilloscope and lists its specifications.
The TDS Family Option 05 Video Trigger Instruction Manual (Tektronix
part number 070-8748-XX) describes use of the video trigger option (for
TDS oscilloscopes equipped with that option only).
The TDS 500B, TDS 600B, & TDS 700A Service Manual (Tektronix part
number 070-9386-XX) provides information for maintaining and servicing
the oscilloscope to the module level.
To Next Page
Loading...
Need help?
General
