General Safety Summary
x
TDS 500D, TDS 600B, & TDS 700D User Manual
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation. Refer to the manual’s installation instructions for
details on installing the product so it has proper ventilation.
Terms in this Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Terms on the Product. These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the
marking.
WARNING indicates an injury hazard not immediately accessible as you read the
marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product. The following symbols may appear on the product:
Protective Ground
(Earth) Terminal
CAUTION
Refer to Manual
Double
Insulated
WARNING
High Voltage
Acquisition circuitry in the TDS 794D is very susceptible to damage from
electrostatic discharge and from overdrive signals.
To prevent electrostatic damage to the TDS 794D, be sure to operate the
oscilloscope only in a static-controlled environment. Be sure to discharge to
ground any electrostatic charge that may be present on cables and probes before
attaching them to the oscilloscope.
To prevent damage from electrostatic discharge, install short-circuit terminations
on unused input connectors. Always use a wrist strap with internal impedance
(provided with your instrument) when handling your oscilloscope or making
connections.
Symbols and Terms
Electrostatic Discharge
To Next Page
Loading...
Need help?
General
