Warranted Characteristics
2–26
TDS 500D, TDS 600C, TDS 700D & TDS 714L Performance Verification and Specifications
Table 2–14: Warranted characteristics — Environmental (cont.)
Name Description
Approvals Conforms to and is certified where appropriate to:
UL 3111–1
2
– Standard for electrical measuring and test equipment
CAN/CSA C22.2 no. 1010.1
2
– Safety requirements for electrical equipment for
measurement, control and laboratory use
2
UL 3111, CSA 22.2 no.1010 Safety Certification Compliance:
Temperature (operating) 5 to +40 C
Altitude (maximum operating): 2000 meters
Equipment Type: Test and Measurement
Safety Class: Class I (as defined in IEC 1010–1, Annex H) – grounded product
Overvoltage Category: Overvoltage Category II (as defined in IEC 1010–1, Annex J)
Pollution Degree: Pollution Degree 2 (as defined in IEC 1010–1)
Note – Rated for indoor use only
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
