Command Descriptions
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−81
DISplay:STYle
Selects how to display the waveform data. This command is
equivalent to setting the Type option in the Display menu.
Display
DISplay:STYle { DOTs | VECtors }
DISplay:STYle?
DOTs displays individual data points.
VECtors connects adjacent data points.
DISplay:STYle VEC
sets the display to connect adjacent data points.
DISplay:STYle?
might return DOTS indicating that the display shows individual
waveform data points.
ERRLOG:FIRST? (Query Only)
Returns the first entry in the error log, or an empty string if the error
log is empty. Use this command along with ERRLOG:NEXT? to
retrieve error log messages.
Calibration and Diagnostic
ERRLOG:FIRST?
Group
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
