Telcoma ZEN 100E - Ce Declaration of Conformity

52
GB
OVERALL LAYOUT (fig. 1)
1) Gearmotor
2) Z124 control unit + OC2 receiver
3) Transmission guides
4) Guide supports + brackets
5) Transmission arm
6) Aerial
7) Radio control
8) Flashing light
9) VEDO180 pair of photocells
10) Power line (230Vac)
Fig. 1
CE DECLARATION OF CONFORMITY
The Manufacturer: Telcoma srl
Via L. Manzoni, 11 - 31015 - Z.I. Campidui Conegliano (TV) - ITALY
DECLARES that the products: GEAR MOTOR DRIVE UNIT ZEN 60 and GEAR MOTOR DRIVE UNIT ZEN 100
are conforming to the only applicable parts of this directive:
- Directive 73/23/EEC, Directive 93/68/EEC Low Voltage
- Directive 89/336/EEC, Directive 92/31/EEC
- Directive 92/31/EEC Electromagnetic Compatibility
The following parts/clauses of the harmonised regulations have been applied:
EN60335-1, EN60204-1, EN 61000-6-3, EN61000-6-1and for the only applicable parts the norms EN12445 e EN12453
DECLARATION BY THE MANUFACTURER (Directive 98/37/EEC, Attachment II, Part B)
The product have been constructed to be incorporated in a machine or to be assembled with other machinery to construct a machine as set out in Directive 98/37/EEC
The manufacturer furthermore declares that it is not permitted to operate the products until the machine in which they will be incorporated
or of which they will become components has been identified and its conformity with the provisions set out in Directive 98/37/EEC and
the national legislation has been declared, i.e. until the products as set forth in this declaration form a single unit with the final machine.
Conegliano, 01/01/2009
The Legal representative
Augusto Silvio Brunello