TELECO AUTOMATION TVRDS868B01 - TRANSMITTER MEMORIZATION; Entering Programming Mode; Single Channel Memorization; Double Channel Memorization

11
4.1 Single channel memorization
Memorization of a single button of any transmitter,
with function OPEN - STOP - CLOSE
Press P2 once and keep it pressed.
The buzzer emits a continuous sound.
Press any button to memorize.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
P2
continuous sound
...
( )
keep it pressed
intermittent sound
button to
memorize
OPEN - STOP - CLOSE ►
4. TRANSMITTER MEMORIZATION
In order to carry the transmitter memorization out it is necessary use the P2 button of the
front cover, entering the “programming mode” first.
WARNING: always check that L7 is flashing before carry the following memorizations out!
If no further button is pressed within 10 seconds the control unit exits automatically the programming mode.
Press P2 five times and keep it pressed
for at least 5 seconds. L7 starts flashing.
( 5 s )
keep it pressed
P2
ENTERING THE PROGRAMMING MODE
P2
(STOP)
L7 flashes
...
P2
(STOP)
5x
4.3 Single channel: courtesy light ON/OFF
Memorization of a single button of any transmitter,
with function LIGHT ON - LIGHT OFF
Press P2 three times and keep it pressed.
The buzzer emits a continuous sound.
Press any button of the pair to memorize.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
P2
4.2 Double channel memorization
Memorization of two buttons of any transmitter in one
step, with function OPEN (STOP) - CLOSE (STOP)
Press P2 twice and keep it pressed.
The buzzer emits a continuous sound.
Press any button of the pair to memorize.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
P2
button to
memorize
button to
memorize
OPEN (STOP) ►
CLOSE (STOP) ►
LIGHT ON - LIGHT OFF ►
2x
3x