12
4.4 Four channels memorization
Memorization of four button transmitter in one step.
Press P2 six times and keep it pressed.
The buzzer emits a continuous sound.
Press any button of the transmitter to memorize.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
button to
memorize
OPEN ►
CLOSE ►
STOP ►
LIGHT ON - LIGHT OFF ►
4.6 Remote memorization of further transmitters
P3
The added transmitter will have the same functions of the transmitter used for the memorization.
This procedure is compatible with any type of transmitter.
Press once P3 button (twice if
within 30 seconds from power
on) of a memorized transmitter
for 2 sec. The buzzer emits a
continuous sound.
Press the button of a transmitter
already memorized. The buzzer
stops for 1 second, then sound
continously again.
Press the button of a new transmitter to memorize
with the same functions. Once the memorization
is successfully completed, the buzzer emits a fast
intermittent sound.
P3 button is
located inside the
transmitter
1 s< 5 s
...
< 5 s
continuous
sound
intermittent sound
continuous
soundmemorized new
memorized
4.5 Remote memorization of the first transmitter
The memory must to be empty in order to perform this procedure.
The added transmitter will have the double-channel function.
OPEN (STOP) ►
CLOSE (STOP) ►
P3
Press once P3 button of a transmitter for 2
sec. within 30 seconds from power on.
The buzzer emits a continuous sound.
Press any button of the pair to memorize. Once
the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
P3 button is
located inside the
transmitter
< 5 s
...
continuous
sound
intermittent sound
new
6x
ON
P2
To Next Page
Loading...
