Teleco TVPLR868AC2 - User Manual

230VAC CONTROL UNIT WITH RADIO RECEIVER TO CONTROL TWO 230VAC MOTORS FOR
ADJUSTABLE & RETRACTABLE LOUVRES
Inputs for rain, wind
and temperature
(for ice) sensors.
Combination of rain
and temperature
sensors to detect
snow.
LED CARD (optional) to control the
1-colour, RGB or RGBW 12/24Vdc
LED lights.
Product code
EN
TVPLR868AC2 (h = 74mm, 868.3MHz) TVPLR868AC2B (h = 50mm, 868.3MHz)
TVPLR916AC2 (h = 74mm, 916MHz) TVPLR916AC2B (h = 50mm, 916MHz)
MOTOR 1: to adjust the angle. It is possible only when the
louvre is totally extended (the closing limit-switch of motor 2
is reached).
MOTOR 2: to pack the louvres. It is possible only when the
slats are at maximum angle (the opening limit-switch of motor
1 is reached).
TELECO AUTOMATION SRL
Via dell’Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com
DOC.: T695.05_EN
TVPLRXXXAC2-AC2B
DATE: 28/10/18
This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights

Summary

Connections, Adjustments and Control Unit Warnings

Control Unit Connections and Components

Transmitters

Programming a 7-Channel Transmitter

Step-by-step guide to memorizing transmitters using P1 or P2 buttons.

Deleting a 7-Channel Transmitter

Instructions for removing single or all transmitters from memory.

Remote Transmitter Memorization

Remote Transmitter Deletion

Motor Configuration

Initiating Motor Configuration

Procedure to enter motor configuration mode by pressing P1 and P2 simultaneously.

Setting Motor Limit Switches

Defining the fully open and closed positions for motor 1 (angle) and motor 2 (retraction).

Automatic Limit Switch Learning

Process for the system to automatically learn motor limit switch positions.

Sensors

Wind Sensor Functionality

Snow Detection Logic

Temperature Sensor for Ice Danger

Rain Sensor Operation

Further Details

Troubleshooting Guide

Solutions for common operational problems encountered with the control unit and transmitters.

Control Unit Replacement

Technical Specifications

Detailed Product Specifications

Teleco TVPLR868AC2 Specifications

General

Input Voltage	230V AC
Operating Temperature	-10°C to +55°C
Storage Temperature	-20°C to +70°C
Humidity	10% to 90% non-condensing
Dimensions	120mm x 80mm x 40mm