Do you have a question about the Teleco TVPLR916AC2 and is the answer not in the manual?
Must be installed by licensed personnel; use correct wiring and all-pole switch.
Dispose of product as e-waste; follow local collection guidelines for recycling.
System waits for transmitter programming and motor configuration upon first power-on.
Initial setup involving pressing P1/P2 to enter configuration mode and setting motor functions.
Procedure to set limit switches for motor 1 (angle) and motor 2 (retraction/extension).
Automatic learning process for motor limit switches by pressing P1 and P2.
Must be installed by licensed personnel; use correct wiring and all-pole switch.
Dispose of product as e-waste; follow local collection guidelines for recycling.
System waits for transmitter programming and motor configuration upon first power-on.
Initial setup involving pressing P1/P2 to enter configuration mode and setting motor functions.
Procedure to set limit switches for motor 1 (angle) and motor 2 (retraction/extension).
Automatic learning process for motor limit switches by pressing P1 and P2.
| Brand | Teleco |
|---|---|
| Model | TVPLR916AC2 |
| Category | Control Unit |
| Language | English |
Loading...