Teleorigin RB900SG-E5 - Page 31

31
CONFIG Commands
8 is start bits
N is parity
1 is stop bits
CONFIG SET TEXT INFO 1
<data><CR><LF>
Sets text information
Where:
<data> - string with additional comment (up to
128 characters)
Response
OK<CR><LF>
Response example
As above
CONFIG GET TEXT INFO 1<CR><LF>
Returns text information
Response
Xxxxxx<CR><LF>
Response example
Test comment<CR><LF>
CONFIG SET RTC SOURCE
<source><CR><LF>
Sets the internal clock sync source
Where:
<source> - clock source, options:
GSM
(time from GSM network)
NTP ntp_addr ntp_port
(time from NTP server, ntp_addr – string with
NTP server address, ntp_port – NTP port (range
from 0 to 65535), optional, usually 123)
Response
OK<CR><LF>
Response example
As above
CONFIG GET RTC SOURCE<CR><LF>
Returns the internal clock synchronization source
Response
xxx<CR><LF>
Response examples
GSM<CR><LF>
or