Teletek electronics Natron WE-C - System Topology

4
5. System Topology
The Natron WE-C wireless expander (network gateway) module must be powered from an
external 24V DC power supply unit, compliant to EN 54 standard. The module is connected to
zone and sounder circuits of the conventional fire alarm panel. The enrolled to the module Natron
series devices, operate in linear network.
Up to 5 separate Natron WE-C modules can be connected to single conventional panel. The
number of connected wireless modules depends on the system/panel capacity.
For optimum operation, plan to ensure at least 2m distance between two modules and the same
minimal distance between each device and a single module.
Note: In case of connection of 5 wireless modules to a fire alarm panel, they must be set for
operation at different frequency channel numbers to avoid delay in operation – see item 16.