Televes H30 Series - Page 26

H30 - CATV & DOCSIS3.0 Meter / Analyzer
26
To run the remote control application, you
must copy the IP in the web browser bar and
automatically will appear the main window of the
application.
IP Auto
IP Manual
The following functions are available in the remote
control application:
- Channel Info
Sets the H30 in Channel Info mode and shows the
current Channel Info main window:
Go back to the
main window
Select other channel
from the plan
Select another prole and
save the Datalog in the H30
- Spectrum
Sets the H30 in Spectrum mode and shows the
current Spectrum main window:
Go back to the
main window
Select other channel
from the plan
Select another prole
and save the Datalog
in the H30
The user can move
the marker to display
the values of level and
frequency at any point
of the spectrum