Televes H30 Series User Manual

H30 - CATV & DOCSIS3.0 Meter / Analyzer
24
Ethernet Features
Set the network parameters in the H30 to use the
Ethernet port.
1. Network setup
To congure Internet access, select the function
“Setup” from the main menu.
- Then, select the “Network” option and then the
“Setup” menu.
- IP selection can be Auto or Manual.
If you choose “Manual”, you must set the IP
address, gateway, and DNS in the Man. items:
- If you choose Auto, you can see the IP that the
H30 chose automatically in the “Network Info”
menu:
2. Firmware update
Note: When the equipment is connected to internet,
detects automatically if there ir a newer software
version. If so, it will appear a message at the top of
the screen in the main menu.
Following are details to update the rmware of
your H30.
Important:
- You need to have a connection to the internet.
- Congure your network parameters (see section
1.- Network setup).
1.- Connect the H30 to the external power supply
using the source provided with the meter.
Connect the H30 to the Internet.
2.- In the main menu, select the function “Setup”.
Then, select “Update rmware”.

Televes H30 Series Specifications

General

Brand	Televes
Model	H30 Series
Category	Measuring Instruments
Language	English