11
EN
6.1. TV or Radio selection
While watching a TV channel, press TV / R on the remote
control unit to switch between TV and Radio channels.
Pressing this key again, you return to the previous mode.
6.2. Selection of programs
To select a program, use CH / CH keys, / cursor
keys or the numeric keypad (0 ... 9) of the remote control
unit.
In addition, the receiver features another way to change
the program in a simple and visual manner. While
watching TV or Radio, press the OK key on the remote
control unit. The list of channels will be displayed. Select
a new program from the list with the keys
, , or
and then press OK.
By pressing the key , the technical information for the
selected program will be displayed.
You can return to the last program you were watching
by pressing EXIT.
6.3. Program information
Each time you change your program, you will see
information about it for a few seconds at the bottom of
the screen (banner).
While watching a program, you can view this
information at any time by pressing the button on the
remote control unit.
By pressing this key again, the program
information (banner) displayed will be expanded
showing then a short summary of the content.
If the current text spans more than one
page, use the or keys
o to scroll.
Use keys or to show the next event information.
In addition to indicating the number and name of the
channel, current time, start time and ending both the
current and the next event, the “banner” may have the
following icons:
: Estimated time display of current event in
relation to the total length of the same.
13
: Indication of classi cation by age.
6. Basic functions
To Next Page
Loading...
Need help?
General
