The router has two wireless access points:
The 5 GHz access point provides extremely high transmission speeds, is less sensitive to interference,
and allows IEEE 802.11a/n/ac/ax wireless devices to be connected.
The 2.4 GHz access point allows you to connect IEEE 802.11b/g/n/ax wireless devices. Use this access
point for wireless devices that do not support 5 GHz.
NOTE The wireless connection can be turned on and off with the WiFi button on the front of the
router ( ). Pressing and holding the button for 5 sec. turn off the wireless connection by repeatedly
holding for 5 sec. you will reconnect.
3.1 Connect to WiFi with QR code
Wifi QR code- you can scan it on your smartphone (or tablet) with the built-in QR code reader in the
WiFi connection area. This feature only works on Android devices.
To use wireless, make sure your computer has a wireless adapter installed and turned on (most
laptops have built-in wireless adapters). If you do not have such an adapter in your computer, you
will need to purchase and install it before using the wireless connection. For instructions on installing
and configuring the wireless adapter, see the instructions for the adapter you purchased.
Note. For more information on wireless speeds and factors, see Appendix 2, "Factors Affecting WiFi
Speed".
4 CONFIGURE THE ROUTER USING A BROWSER
If you want, you can change the router settings (for example, the wireless settings). Follow these
steps:
❶ Launch your web browser and go to enter the address http://192.168.1.1 and press the
Enter key. The router's WEB interface opens.
❷ Leave in the first box User, and enter the password in the second and click Sign In. The router
will check your account and reload the page.
Note: The login password is written on the back of the router's label as the "Web admin password."