In the WPS section you can:
initiate WPS pairing by pressing the button
• If you want to entertain your guests via Wi-Fi but do not want their WiFi devices to access your
LAN, activate the Guest access point:
a. in the AP section, select Guest under Home
b. then click at the top / right of the window
c. State change to ON
d. if you want to change the network name (SSID) and / or password
e. and, by generating a QR code right here, you will be able to "feed" the guest on the
Internet.
f. Remember to save the configuration by clicking the Save button.
7 LAN IP / SUBNET CHANGE, DHCP SERVER MANAGEMENT, IP
RESERVATION
In the main menu, click on the name Local Network. In the additional window that will appear, you
will be able to change and configure the following functions:
7.1 Disabling the DHCP Server
The server can be turned off at DHCP Settings by changing the DHCP Server ON => OFF.
7.2 Changing the LAN subnet
To change the internal network subnet (for example, to 192.168.0.x), you need to do the following:
• In the Local Device IPv4 address field, enter the required device IP address (for example,
192.168.0.1).
To Next Page
Loading...
Need help?
General