TELINK SEMICONDUCTOR TLSR8232 - Blt_Ev_Flag

To Next Page

To Previous Page

Telink TLSR8232 BLE SDK Developer Handbook

AN-19112700-E1 66 Ver.1.0.0

Data length “n”: 34.

Pointer “p”: p points to one 34-byte RAM area, corresponding to the “connect request

PDU” below.

Figure 3-20 Connect Request PDU

Please refer to “rf_packet_connect_t” defined in “ble_common.h”. In the structure below,

the connect request PDU is from scanA[6] (corresponding to InitA in Figure 3-20) to hop.

typedef struct{

u32 dma_len;

u8 type;

u8 rf_len;

u8 scanA[6];

u8 advA[6];

u8 accessCode[4];

u8 crcinit[3];

u8 winSize;

u16 winOffset;

u16 interval;

u16 latency;

u16 timeout;

u8 chm[5];

u8 hop;

}rf_packet_connect_t;

3.2.7.5 BLT_EV_FLAG_TERMINATE

Event trigger condition: This event will be triggered when Link Layer state machine exits

Conn state Slave role in any of the three specific cases.

Pointer “p”: p points to an u8-type variable “terminate_reason”. This variable indicates the

reason for disconnection of Link Layer.

TELINK SEMICONDUCTOR TLSR8232 - Blt_Ev_Flag_Terminate