HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 119 of
229
+CMGL - List Messages
<stat> - message status
<fo> - first octet of the message PDU
<mr> - message reference number
<scts> - arrival time of the message to the SC
<dt> - sending time of the message
<st> - message status as coded in the PDU
Note: If status of the message is ‘received unread’, status in the storage changes to
‘received read’ before display
AT+CMGL=?
Test command returns a list of supported <stat>s
Example AT+CMGF=1 Set Text mode
OK
AT+CMGL
+CMGL: 1,"REC UNREAD","+821020955219",,"07/07/26,20:05:11+36"
SMS Test message
+CMGL: 2,"REC UNREAD","+821020955219",,"07/07/26,20:05:58+36"
SMS Test message...
+CMGL: 3,"REC UNREAD","+821020955219",,"07/07/26,20:06:37+36"
SMS Test Message..
+CMGL: 4,"REC UNREAD","+821020955219",,"07/07/26,20:07:43+36"
TEST MESSAGE..
+CMGL: 5,"REC UNREAD","+821020955219",,"07/07/26,20:09:07+36"
TEST MESSAGE
OK
AT+CMGF=0 Set PDU mode
OK
AT+CMGL=2
+CMGL: 0,2,,24
079128019291903011640A8110567892820000A70CF4F29C0E6A97E7F3F0B90
C
+CMGL: 1,2,,21
079128019291903011640A8110516529700000A709027A794E77B95C2E
+CMGL: 26,2,,17
08812801009901025911640A8110567892820014A704C7D1B1DB
OK
Reference 3GPP TS 27.005
3.5.4.3.3. Read Message - +CMGR
+CMGR - Read Message
AT+CMGR=
<index>
Set command returns message with location value <index> from message storage
<mem1> to the TE
Parameter:
<index> - message index.
To Next Page
Loading...
Need help?
General
