Need help?Do you have a question about the Telit Wireless Solutions LE910C1-AP and is the answer not in the manual?
General| Brand | Telit Wireless Solutions |
|---|---|
| Model | LE910C1-AP |
| Category | Control Unit |
| Language | English |
Defines voltage limits that must not be exceeded when the module is off.
Specifies operating ranges for voltage and temperature.
Details interface logic levels, primarily 1.8V CMOS.
Details operating ranges for SD card pads at 1.8V.
Details operating ranges for SIM card pads at 1.8V.
Defines maximum voltage levels for dual voltage pads.
Details operating ranges for SD card pads at 2.95V.
Details operating ranges for SIM card pads at 2.95V.
Describes the procedure for turning on the LE910C1 module.
Explains the module's boot and activation process.
Details methods for shutting down the LE910C1 module.
Lists nominal voltage, range, and ripple for the power supply.
Provides guidelines for power supply electrical design.
Guidelines for designing a battery power supply.
Provides guidelines for PCB layout of the power supply.
Specifies requirements for GSM, WCDMA, and LTE antennas.
Explains the USB transceiver, its capabilities, and signals.
Introduces the two serial ports (MODEM SERIAL PORT 1 and 2).
Provides the recommended footprint for the application board.
Explains the need for and placement of bypass capacitors.
Provides essential safety precautions for using the product.
To Next Page
