LE910C1 Hardware User Guide
1VV0301298 Rev. 1.08 - 2017-11-14
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
107 of 119
11.4. EMC Recommendations
All LE910C1 signals are provided with some EMC protection. Nevertheless, the accepted level
differs according to the specific pin. Table 41 lists the characteristics.
Table 41: EMC Recommendations
Pad Signal I/O Function Contact Air
All Pins
All pins All functions ± 4KV ± 8KV
Antenna
F1,K1,R9 Antenna
pads
Analog
I/O
Antenna pad ± 4KV ± 4KV
Appropriate series resistors must be considered to protect the input lines from overvoltage.
To Next Page
Loading...
Need help?
General
