EasyManuals Logo

Telit Wireless Solutions HE863 Series User Manual

Telit Wireless Solutions HE863 Series
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 121 of
229
+CMGR - Read Message
<dcs> - Data Coding Scheme
<oa> - Originator address, string type.
<da> - Destination address, string type.
<alpha> - string type alphanumeric representation of <da> or <oa>, corresponding
to an entry found in the phonebook; used character set is the one
selected with command +CSCS.
<sca> - Service Centre number
<tooa>,<toda >,<tosca> - type of number <oa>,<da>,<sca>
129 - number in national format
145 - number in international format (contains the "+")
<length> - text length
<data> - TP-User_data
If <dcs> indicates that GSM03.38/23.038 default alphabet is used , each
character of GSM/WCDMA alphabet will be converted into current TE
character set (see +CSCS)
If <dcs> indicates that 8-bit or UCS2 data coding scheme is used, each 8-
bit octet will be converted into two IRA character long hexadecimal number
(e.g. octet 0x2A will be converted as two characters 0x32 0x41)
Note: If status of the message is ‘received unread’, status in the storage changes to
‘received read’ before display
AT+CMGR=?
Test command returns the OK result code
Example AT+CMGF=0
AT+CMGR=1
+CMGR: 2,,21
079128019291903011640A8110516529700000A709027A794E77B95C2E
OK
AT+CMGF=1
OK
AT+CMGR=3
+CMGR: "REC READ","+821020955219",,"07/07/19,10:06:34+36"
test message/.....
OK
Reference 3GPP TS 27.005
3.5.4.3.4. New Message Acknowledgement to ME/TA - +CNMA
+CNMA – New Message Acknowledgement
(PDU Mode)
AT+CNMA [=<n>
[,<length> [<CR>
PUD is given<ctrl-
Z/ESC]]]
Execution command confirms correct reception of a new message (SMS-DELIVER
or SMS-STATUS-REPORT) which is routed directly to the TE.
Note: When +CSMS is set to 1, This command should be sent TA within 15
seconds after a +CMT new message indication, and no +CNMA is needed after
timeout, giving +CNMA after timeout will result in +CMS error. CNMI parameters

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telit Wireless Solutions HE863 Series and is the answer not in the manual?

Telit Wireless Solutions HE863 Series Specifications

General IconGeneral
BrandTelit Wireless Solutions
ModelHE863 Series
CategoryControl Unit
LanguageEnglish

Related product manuals