HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 17 of 229
3.2.2.2. Message Service Failure Result Code - +CMS ERROR: <err>
This is NOT a command; it is the error response to +Cxxx
3gpp TS 27.005
commands
Syntax: +CMS ERROR: <err>
Parameter: <err> - numeric error code. The <err> values are reported in the table:
Numeric Format Meaning
0...127 3gpp TS 24.011 Annex E-2 values
128...255 3gpp TS 23.040 sub clause 9.2.3.22 values
300 ME failure
301 SMS service of ME reserved
302 operation not allowed
303 operation not supported
304 invalid PDU mode parameter
305 invalid text mode parameter
310 SIM not inserted
311 SIM PIN required
312 PH-SIM PIN required
313 SIM failure
314 SIM busy
315 SIM wrong
316 SIM PUK required
317 SIM PIN2 required
318 SIM PUK2 required
320 memory failure
321 invalid memory index
322 memory full
330 SMSC address unknown
331 no network service
332 network time-out
340 no +CNMA acknowledgement expected
500 unknown error
To Next Page
Loading...
Need help?
General
