HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 23 of 229
The values set by following commands are stored in the profile extended section and they
don’t depend on the specific AT channel instance:
+CALM, +CRSL, +CMUT,
+CLVL, #CAP, #SRS,
#SRP, #STM, #E2SMSRI,
#SHFEC, #HFMICG, #HSMICG,
#SHFSD, #SPKMUT, #NITZ,
#E2SLRI, #PSEL, #HSRECG,
#SHFAGC, #SHSAGC, #SHSEC,
#SHSNR, #SHFNR, #SHSSD,
#TSVOL, #PSMRI #TEMPMON,
The values set by following commands are automatically stored in NVM, without issuing any
storing command and independently from the profile (unique values), and are automatically
restored at startup:
#SCFG, #DNS, #TCPMAXDAT,
#SCFGEXT, #TEMPCFG
The values set by following commands are stored in NVM on demand, issuing specific
commands and independently from the profile:
#VAUX
stored by #VAUXSAV command.
#UDT
Stored by #UDTSAV command.
#USERID, #PASSW, #PKTSZ,
#DSTO, #SKTTO, #SKTSET
#SKTCT
stored by #SKTSAV command and automatically restored at startup; factory default valutes are restored by #SKTRST command.
+CSCA, +CSMP, +CSCB
stored by +CSAS
3
command and restored by +CRES
4
command.
3
Both commands +CSAS and +CRES deal with non-volatile memory, intending for it either the NVM and the
SIM storage.
To Next Page
Loading...
Need help?
General
