Telit Wireless Solutions HE863 Series

To Next Page

To Previous Page

HE863 family AT commands reference guide

80377ST10083a Rev.6 – 2012-11-12

H - Disconnect

conversation is active the device is in on-line mode (commands are not sensed and

characters are sent to the other party), hence escape sequence (see register S2) is

required before issuing this command, otherwise if &D1 option is active, DTR pin

has to be tied Low to return in command mode.

Reference V25ter.

3.5.2.3.4. Guard Tone - &G

&G - Guard Tone

AT&G

Set command has no effect is included only for backward compatibility with

landline modems.

3.5.2.3.5. Sync/Async Mode - &Q

&Q - Sync/Async Mode

AT&Q

Set command has no effect is included only for backward compatibility with

landline modems.

Telit Wireless Solutions HE863 Series - Page 43