LE910C1 Hardware User Guide
1VV0301298 Rev. 1.08 - 2017-11-14
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
69 of 119
7.5.5. GNSS Antenna – Installation Guidelines
• The LE910C1, due to its sensitivity characteristics, is capable of performing a fix inside
buildings. (In any case, the sensitivity could be affected by the building characteristics i.e.
shielding.)
• The antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
• The antenna must not be installed inside metal cases.
• The antenna must be installed according to the antenna manufacturer’s instructions.
To Next Page
Loading...
