Tellermate TY1 User Manual

TY1 / TY+ Guide
PIN # - The PIN number is needed for calibrations and programming.
1 First press and release the on.off button (one star on the screen).
2 Then press and release the enter button (two stars).
3 Then press and release the dollar sign button (three stars).
4 Then press and release enter button.
Calibrating the Cup
Taring the Cup (TCup)
1 Start at the 1 cent cup (Note: if you are already into a count then just press and release the bottom of the coin
button until it shows "Cup One Cent").
2 Press and release the Menu button.
3 Using the Bill button, press and release the bottom of the button until it highlights "New Cup".
4 Press and release the Enter button.
5 The screen will prompt you to put an empty cup on the HOD.
On/ O $ Menu Enter

Tellermate TY1 Specifications

General

Brand	Tellermate
Model	TY1
Category	Cash Counter
Language	English

Summary

PIN Entry

Entering the PIN

Steps to enter the PIN number for calibration and programming operations.

Calibrating the Cup

Taring the Cup (TCup)

Procedure to calibrate the cup by taring it on the HOD.

Continuing Cup Calibration

Steps 6-7 for completing the cup calibration process.

Calibrating a Coin

Coin Calibration Steps

Initial steps for calibrating coins, excluding pennies.

Coin Calibration Process

Detailed steps from selecting coins to saving new weights.

Additional Coin Calibration

Steps for calibrating bills, including entering PIN and selecting bills.

Completing Coin Calibration

Final steps to save new weight or abandon calibration.

Calibrating a Bill

Bill Calibration Setup

Steps to initiate bill calibration via the Menu and Supervisor options.

Bill Calibration Procedure

Steps for calibrating specific bill denominations and weights.

Saving Bill Calibration

Steps to save new weight or abandon after bill calibration.

Printer Operation

Turning on the Printer

Procedure to enable the printer function within the program.

Bank Management

Setting a Bank

Instructions on how to set different bank amounts.

Auto Add/Scroll Feature

Enabling Auto Add/Scroll

Steps to turn on the Auto Add or Auto Scroll feature.

Auto Add Status

Explanation of the '√' and 'X' symbols for feature status.