Telstra TEC-C - Call Management Features; Viewing and Dialing Call Lists; Nuisance Call Blocking

View or dial a number in Call
list calls
1 The Call list stores details of the
last 50 incoming calls.
2 Press calls Press calls or to scroll
through the list.
3 Press to dial the number.
Nuisance Call Blocking
lock an incoming call according
to your blacklist
1 Press mute scroll down to Call Block
and press mute again. Enter the PIN
default 0000).
2 Scroll to Blacklist and press mute
3 Block Mode is displayed. Press mute
4 Scroll to the setting you require, either
Block all, Allow VIP or Block List and
press mute
5 Scroll calls or to display Always On
or Start end and press mute
If you select Start end, enter the
block call start time and press OK,
then enter the end time and press
OK.
lock incoming calls from a
number in your Call list
1 Press calls to enter the Call List Then
scroll to the entry you want to block
and press mute
2 Scroll down to Call Block, press mute
3 Screen will show the number that
will be blocked. Press mute and
number will be blocked.
Nuisance Call Blocking
Block an incoming call by prefix in
your Call list
1 Press mute scroll down to Call Block
and press mute
again. Enter the PIN
default 0000 .
2 Scroll to Blacklist and press mute
3 Scroll to Block number and press mute
4 Scroll to Add new and press mute
5 Enter number is displayed. Enter
the required number, for example to
block Overseas calls you can then
enter 0011 which is the prefix for
Overseas calls. Enter 0011 then
press mute
to save the prefix. You will
hear the confirmation beep.
To activate the call block feature
using the prefix you just entered:
1 Press scroll down to Call Block
and press mute again. Enter the PIN
default 0000 .
2 Scroll to Blacklist and press mute
3 Block Mode is displayed. Press mute
4 Scroll to Block list and press mute
5 Always on is displayed. Press mute
to
save.
6 You will hear the confirmation beep.
Important: The call block feature
will not work if the Block Mode is set
to Off.