Telstra TEC-C - DECT Hub and Advanced Navigation; DECT Hub Button Functions; Menu and Keypad Usage; Connecting to the NBN

DECT Hub button
Press to locate
handsets.
Using the menu mute
• Press mute to open the main menu,
scroll through using calls or when
the menu you want is displayed, press
mute Press calls or to scroll through
the sub menus and press mute to
select.
• mute and mute buttons let you select
options displayed above the buttons
on the display.
• Use mute to exit a menu or go back.
• If no buttons are pressed for 30
seconds
the handset will return to the
idle screen.
In use light
Green LED flashed when
the phone rings or the
handset is in use.
Using the keypad
When entering tetters you may need to
press the same button a few times until
the letter you want is displayed, e.g.
press 2 once for A, twice for B, three
times forC
To enter a space, press 0
To toggle between upper and lower case
characters, press and hold # .
Connecting to the NBN™
If you need help connecting your cordless
phone to the NBN call us on 1800 834 273 or
go to www.telstra.com/NBNgatewaysetup